Kia Forte: Removal
| 1. |
Remove the mirror wiring cover (A).
|
| 2. |
Disconnect the mirror connector (B).
|
| 3. |
Loosen the mirror mounting screw.
|
| 4. |
Push the mirror base up to remove the mirror assembly (A).
|
Inspection
Check it by the procedure below to see if the function of the ECM is normal.
1.
Turn the ignition key to the "ON" position.
2.
Cov ...
Installation
1.
Install the mirror assembly.
2.
Install the mirror wiring cover and connector.
...
See also:
Antenna Coil Installation
1.
Install the antenna coil.
2.
Connect the antenna coil connector.
3.
Install the crash pad lower panel.
...
Auto Defogging Sensor Description
The auto defogging sensor is installed on the front windshield glass.
The auto defogging sensorr senses moisture on the windshild. The air conditioner
control module receives the signal from ...
Trunk Lid Latch Component Location
(4Door)
1. Trunk lid latch assembly
(2Door)
1. Trunk lid latch assembly
...
Copyright © www.kifomanual.com 2014-2024