Kia Forte: Specifications
| Items |
Specifications |
|
| Clutch operation method |
Hydraulic type |
|
| Clutch cover |
Type |
Diaphragm spring strap |
| Clutch disc |
Type |
Single dry with diaphragm |
| Facing diameter (Outer × inner) |
Ø235 × Ø155 mm (Ø9.2520 × Ø6.1024 in.) |
|
| Thickness [When free] |
Gasoline 1.6 T-GDI : 8.65 ± 0.3 mm (0.3406 ± 0.0118 in.) Gasoline 1.8 / 2.0 : 8.3 ± 0.3 mm (0.3268 ± 0.0118 in.) |
|
| Rivet depth |
Gasoline 1.8 / 2.0 : 1.0 mm (0.0394 in.) Gasoline 1.6 T-GDI : 1.1 mm (0.0433 in.) |
|
| Service Standard |
| Item |
Specification |
| Clutch disc rivet depth |
0.3 mm (0.0118 in.) |
| Tightening Torques |
| Item |
N.m |
kgf.m |
lb-ft |
| Clutch pedal mounting nut & bolt |
18.6 ~ 23.5 |
1.9 ~ 2.4 |
13.7 ~ 17.4 |
| Clutch switch mounting nut |
7.8 ~ 9.8 |
0.8 ~ 1.0 |
5.8 ~ 7.2 |
| Ignition lock switch mounting nut |
7.8 ~ 9.8 |
0.8 ~ 1.0 |
5.8 ~ 7.2 |
| Concentric slave cylinder assembly mounting bolt |
19.6 ~ 26.5 |
2.0 ~ 2.7 |
14.5 ~ 19.5 |
| Clutch release cylinder mounting bolt |
14.7 ~ 21.6 |
1.5 ~ 2.2 |
10.8 ~ 15.9 |
| Clutch release cylinder bleed plug |
6.8 ~ 9.8 |
0.7 ~ 1.0 |
5.0 ~ 7.2 |
| Clutch cover mounting bolt (Gasoline 1.6 T-GDI) |
24.5 ~ 35.3 |
2.5 ~ 3.6 |
18.1 ~ 26.0 |
| Clutch cover mounting bolt (Gasoline 1.8 / 2.0) |
11.8 ~ 14.7 |
1.2 ~ 1.5 |
8.7 ~ 10.8 |
Clutch System
LubricantsFront Lower Arm Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A ...
Fuel Pressure Regulator Removal
1.
Remove the fuel pump (Refer to “Fuel Pump” in this group).
2.
Disconnect the electric pump wiring connector (A) and the fuel
sender ...
Variable Charge Motion Actuator (VCMA) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the VCMA connector.
3.
Check that the VCMA is not stuck by foreign ...