Kia Forte: Torque Converter Control Solenoid Valve (T/CON_VFS) Circuit Diagram

Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications

Direct control VFS[T/CON] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 9.81 ~ 500.14 (0.1 ~ 5.1,1.42 ~ 72.54) Current value(mA) ...

Torque Converter Control Solenoid Valve (T/CON_VFS) Inspection

1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...

See also:

Variable Charge Motion Actuator (VCMA) Installation
   • Install the component with the specified torques. • ...

DC/DC Converter Description
Due to the considerably more frequent occurrence of starting operations, the electrical load that occurs often leads to voltage dips in the vehicle network. In order to stabilize the power s ...

Oil Pressure Switch Inspection
1. Check the continuity between the terminal and the body with an ohmmeter. If there is no continuity, replace the oil pressure switch. ...