Kia Forte: Brake Pedal

Installation

1. Install in the reverse order of removal.    Use a new washer (A) whenever ...

Removal

1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. (Refer to Body - & ...

See also:

Output Speed Sensor Inspection
1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

Brake Booster
1. Brake booster 2. Master cylinder assembly 3. O-ring ...

Engine coolant
The high-pressure cooling system has a reservoir filled with year-round antifreeze coolant. The reservoir is filled at the factory. Check the antifreeze protection and coolant level at least once a ...