Kia Forte: ESC OFF Switch Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Brake System / ESC(Electronic Stability Control) System / ESC OFF Switch Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the crash pad side switch assembly (A).
|
| 3. |
Disconnect the crash pad switch connector (B).
|
| 4. |
Check the continuity between the switch terminals as the ESC OFF
switch is engaged.
|
ESC OFF Switch Description
1.
The ESC OFF switch is for the user to turn off the ESC system.
2.
The ESC OFF lamp is on when ESC OFF switch is engaged.
...
Steering Angle Sensor
The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power
Steering) and it sends messages to HECU through CAN communication line.
The SAS is used to determine turning directio ...
See also:
CVVT & Camshaft Description
Continuous Variable Valve Timing (CVVT) system advances or retards the
valve timing of the intake and exhaust valve in accordance with the ECM control
signal which is calculated by the engine ...
ESC Control Module Installation
1.
Install in the reverse order of removal.
2.
Tighten the HECU mounting bolts and nuts to the specified torque.
3.
...
Description of ESC
Electronic Stability Control (ESC) recognizes critical driving conditions,
such as panic reactions in dangerous situations, and stabilizes the vehicle
by wheel-individual braking and engine c ...
Copyright © www.kifomanual.com 2014-2025