1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the front door trim.
(Refer to Body - "Front Door Trim")
|
3. |
Disconnect the power window switch connectors (A).
|
4. |
Remove the power window switch (A) after loosening 4 screws.
|
5. |
Remove the power door mirror switch (A) after loosening a screw.
|
Adjustment
Concentric Slave Cylinder Air Bleeding
Procedure
1.
After disconnecting a cap from the concentric slave cylinder air
bleeder, insert a vinyl hose in the pl ...
Front Driveshaft Component
1. Driveshaft (LH)
2. Circlip
3. Driveshaft (RH)
...
Operation
Evaporative System Monitoring
Evaporative And ORVR Emission Control System
This system consists of a fill vent valve, fuel shut-off valve, fuel cut
valve (for roll over), two way val ...