Kia Forte: Overhead Console Lamp Installation
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Lighting System / Overhead Console Lamp Installation
| 1. |
Install the overhead console lamp after connecting the sunroof
switch connector and lamp connector.
|
| 2. |
Install the lens after tightening 2 screws.
|
Overhead Console Lamp Removal
1.
Disconnect the negative (-) battery terminal.
2.
Loosen 2 screws holding the overhead console (A).
3.
...
License Lamp Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the lens (A) after loosening the mounting screws.
3.
...
See also:
Front Hub / Knuckle Disassembly
1.
Remove the snap ring (A).
2.
Remove the hub assembly from the knuckle assembly.
(1)
Install the ...
Dynamic Damper Installation
1.
Apply soap powder on the shaft to prevent being damaged between
the shaft spline and the dynamic damper.
2.
Install the dynamic damper.
...
Installation
Sensor Fit
•
Handle the sensor with care.
•
...
Copyright © www.kifomanual.com 2014-2025