Kia Forte: In-car Sensor (DATC only) Description

An in-car air temperature sensor is located in the crash pad lower panel.

The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to the heater control unit and according to this signal the control unit regulates the in-car temperature to the intended value.

Evaporator Temperature Sensor Replacement

1. Disconnect the negative (-) battery terminal. 2. Disconnect the evaporator temperature sensor connector (A). 3. ...

In-car Sensor (DATC only) Inspection

1. Turn the ignition switch ON. 2. Blow air with changing temperature into the in-car sensor air inlet. Measure the sensor resistance betwe ...

See also:

Speakers Removal
Front Speaker 1. Remove the front door trim panel and speaker connector. (Refer to Body - "Front Door Trim") 2. Remove the ...

Installation
1. Install in the reverse order of removal.    If the oil seal on the transaxle case side is da ...

Rear Combination Lamp Removal
Rear Combination Lamp (Outside) 1. Disconnect the negative (-) battery terminal. 2. Remove the rear combination lamp cover (A). ...