Kia Forte: Auto Defogging Actuator Replacement - Heater - Heating,Ventilation, Air Conditioning - Kia Forte TD 2014-2018 Service ManualKia Forte: Auto Defogging Actuator Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Heater / Auto Defogging Actuator Replacement

1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to Body -"Glove Box Housing")
3.
Remove the passenger's side shower duct by loosening the screw.
4.
Disconnect the connector (A) and then remove the auto defogging actuator (B) after loosening the mounting screws.

5.
Install in the reverse order of removal.
Auto Defogging Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the auto defogging connector. 3. Verify that the auto defoggin ...

PTC Heater Description
The PTC (Positive Temperature Coefficient) heater is installed at the exit or the backside of the heater core. The PTC heater is an electric heater using a PTC element as an auxiliary hea ...

See also:

Rear Wheel Speed Sensor Components
1. Rear wheel speed sensor 2. Rear wheel speed sensor connector ...

DC/DC Converter Removal
1. Disconnect the battery negative (-) cable. 2. Remove the crash pad lower panel. (Refer to Body - Crash pad lower panel.) ...

Auto Head Lamp Leveling Unit Operation
Operating Procedure 1. Suspension angle change resulted from vehicle's load change. 2. Sensor angle change. 3. ...

Copyright © www.kifomanual.com 2014-2024