1. |
Disconnect the negative (-) battery terminal.
|
2. |
Disconnect the connector (A) of the blower motor.
|
3. |
Remove the blower motor (B) after loosening the mounting screws.
|
4. |
Install in the reverse order of removal.
|
Camshaft Position Sensor (CMPS) Inspection
1.
Check the signal waveform of the CMPS and CKPS using the GDS.
Specification:
Refer to “Wave Form”
...
Removal
The side airbag cannot be disassembled from the seat back assembly,
so replace assembly when replacing the side airbag.
...
Ignition Coil Circuit Diagram
[M/T]
[A/T]
...