1. |
Remove the relief plunger.
Remove the plug (A), spring (B) and relief plunger (C).
|
2. |
Inspect the relief plunger.
Coat the plunger with engine oil and check that it falls smoothly
into the plunger hole by its own weight.
If necessary, replace timing chain cover.
|
3. |
Inspect the relief valve spring.
Inspect for distortion or breakdown of the relief valve spring.
|
4. |
Inspect the rotor side clearance.
Using a feeler gauge and precision straight edge, measure the
clearance between the inner rotors and precision straight edge.
If the side clearance is greater than maximum, replace the rotors
as a set.
If necessary, replace the timing chain cover.
|
5. |
Inspect the rotor body clearance.
Using a feeler gauge, measure the clearance between the outer
rotor and body.
If the body clearance is greater than maximum, replace the rotors
as a set.
If necessary, replace the timing chain cover.
|
6. |
Inspect the rotor guide clearance.
|
Removal
1.
Disconnect the battery negative cable and wait for at least thirty
seconds.
before beginning work.
2.
Remove the roof tr ...
Seat Heater Switch Installation
Driver/Passenger Seat
1.
Install the switchs and connect the switch connectors.
2.
Insatll the floor console assembly.
...
Rear Shock Absorber Replacement
1.
Loosen the wheel nuts slightly. Raise the vehicle, and make sure
it is securely supported.
2.
Remove the front wheel and tire (A) from f ...