Kia Forte: Engine Electrical System

Muffler Removal and Installation

Front Muffler 1. Detach the rubber hanger (A) from the front muffler. 2. Remove the front muffler (B). Tightening ...

Specification

Ignition System Ignition Coil Item Specification Primary Coil Resistance (Ω) 0.75 ± 15％ [20°C (68°F)] Secondary Coil Re ...

See also:

Removal
Pressure Side Impact Sensor    • Removal of the airbag must be performed according ...

Fuel Pressure Regulator Installation
1. Install in the reverse order of removal. ...

Accelerator Position Sensor (APS) Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output volt ...