Kia Optima Manuals

Kia Forte: Alternator Specification - Charging System - Engine Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Alternator Specification

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Electrical System / Charging System / Alternator Specification

Alternator [Non-ISG type]
Item
 Specification
Rated voltage
 13.5V, 90A
Speed in use
 1,000 ~ 18,000 rpm
Voltage regulator
 IC Regulator built-in type
Regulator Setting Voltage
 External mode
 Refer to below graph
Internal mode
 14.55 ± 0.3V
Temperature Gradient
 External mode
 0 ± 3 mV / °C
Internal mode
 -3.5 ± 2mV / °C

※ Regulator Setting Voltage (External mode)
Alternator [ISG type]
Item
 Specification
Rated voltage
 13.5V, 120A
Speed in use
 1,000 ~ 18,000 rpm
Voltage regulator
 IC Regulator built-in type
Regulator Setting Voltage
 External mode
 Refer to below graph
Internal mode
 14.55 ± 0.3V
Temperature Gradient
 External mode
 0 ± 3 mV / °C
Internal mode
 -3.5 ± 2mV / °C

※ Regulator Setting Voltage (External mode)
Alternator Description
The Alternator has eight built-in diodes, each rectifying AC current to DC current. Therefore, DC current appears at alternator "B" terminal. In addition, the charging voltage ...

Alternator Components
1. OAD (Overrunning Alternator Decoupler) pulley 2. Front housing 3. Front bearing 4. Stator 5. Rotor 6. Rear bearing 7. Rear housing 8. Rectifier assembly 9. Re ...

See also:

Ambient Temperature Sensor Inspection
1. Turn the ignition switch OFF. 2. Disconnect ambient temperature sensor. 3. Check the resistance of the ambie ...

Operation
Evaporative System Monitoring Evaporative And ORVR Emission Control System This system consists of a fill vent valve, fuel shut-off valve, fuel cut valve (for roll over), two way val ...

Crankshaft Damper Pulley Removal and Installation
1. Remove the RH front wheel. 2. Remove the drive belt. (Refer to Timing System - "Drive Belt") 3. ...

Categories

Copyright www.kifomanual.com 2014-2026