Kia Optima Manuals

Kia Forte: Removal - Vehicle Speed Sensor - Manual Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Manual Transaxle System / Vehicle Speed Sensor / Removal

1.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
2.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
3.
Disconnect the vehicle speed sensor (A).
4.
Remove the vehicle speed sensor (A) and driven gear.
Tightening torque:
4.9 ~ 6.9 N.m (0.5 ~ 0.7 kgf.m, 3.6 ~ 5.1 lb.ft)

  
After removing speed sensor, be careful not to enter dust, foreign matters, etc in speed sensor hole.
5.
Separate the vehicle speed sensor (A) and driven gear (B).
Inspection
W/Harness Inspection 1. Check the vehicle speed sensor by using the scan tool. (if normal, current vehicle speed is display) 2. Chec ...

Installation
1. Install in the reverse order of removal.    Do not reuse the O-ring (A). ...

See also:

Intake Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuato ...

Defroster
CAUTION - Conductors To prevent damage to the conductors bonded to the inside surface of the rear window, never use sharp instruments or window cleaners containing abrasives to clean the window. I ...

AVN Head Unit Components
AVN Head Unit Connector (AVN) Connector Pin Information No. Connector A Connector B 1 Rear left speaker (+) MM CAN high 2 ...

Categories

Copyright www.kifomanual.com 2014-2025