Kia Forte: Torque Converter Control Solenoid Valve (T/CON_VFS) Circuit Diagram

Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications

Direct control VFS[T/CON] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 9.81 ~ 500.14 (0.1 ~ 5.1,1.42 ~ 72.54) Current value(mA) ...

Torque Converter Control Solenoid Valve (T/CON_VFS) Inspection

1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...

See also:

Installation
1. Install the multifunction switch. 2. Install the clock spring. 3. Install the steering column upper and lowe ...

Turn signals and lane change signals
The ignition switch must be on for the turn signals to function. To turn on the turn signals, move the lever up or down (A). The green arrow indicators on the instrument panel indicate which tur ...

IMS Control Switch Inspection
1. With the power seat switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the power seat ...