1. |
Check the bushing for wear and deterioration.
|
2. |
Check the front stabilizer bar for deformation.
|
3. |
Check the all bolts and nuts.
|
Fuel Pump Motor Removal
1.
Remove the fuel pump (Refer to “Fuel Pump” in this group).
2.
Disconnect the electric pump wiring connector (A) and the fuel
sender conn ...
Output Speed Sensor Signal Waveform
Fig 1) Input/Output speed sensor at low speed
Fig 2) Input/Output speed sensor at high speed ...
Hood switch Inspection
1.
Disconnect the hood switch connector (A).
2.
Check for continuity between terminals
...