Kia Forte: Steering Column and Shaft Disassembly
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Steering System / Electric Power Steering / Steering Column and Shaft Disassembly
Universal joint assembly
| 1. |
Loosen the bolt (A) and then disconnect the universal joint assembly
from the steering column assembly.
|
| 2. |
Reassembly is the reverse of the disassembly.
|
Key lock assembly
| 1. |
Make a groove on the head of special bolts (A) by a punch.
|
| 2. |
Loosen the special bolt using a screw driver and then remove the
key lock assembly from the steering column assembly.
|
| 3. |
Reassembly is the reverse of the disassembly.
|
Steering Column and Shaft Replacement
1.
Remove the steering wheel.
(Refer to Steering System - "Steering Wheel")
2.
Remove the steering column shroud.
(Ref ...
Steering Column and Shaft Inspection
1.
Check the steering column for damage and deformation.
2.
Check the joint bearing for damage and wear.
3.
Che ...
See also:
Drive plate Removal and Installation
1.
Remove the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the drive plate (A ...
Seat Belt Buckle Sensor (BS)
The SRSCM shall monitor the status of the driver and passenger seat belt
buckle. The SRSCM provides one pin each for the driver and passenger seat belt
buckle status input. The seat belt buck ...
Removal
1.
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
2.
Remove the front seat assembly.
...
Copyright © www.kifomanual.com 2014-2025