1. |
Check the steering column for damage and deformation.
|
2. |
Check the joint bearing for damage and wear.
|
3. |
Check the tilt bracket for damage and cracks.
|
4. |
Check the key lock assembly for proper operation and replace it
if necessary.
|
Cylinder Head Removal
Engine removal is not required for this procedure.
•
Use fender covers to avoid damaging pa ...
Start/Stop Button Removal
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, remove the center garnish [LH]
(A).
...
Side Impact Sensor (SIS)
Side Impact Sensor (SIS) system consists of two P-SIS which are installed
at each center of the front door module (LH and RH) and two SIS which are installed
at each center pillar nearby (LH ...