Kia Forte: Front Impact Sensor (FIS)

The front impact sensor (FIS) is installed in the front side member. They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the Front Impact Sensor (FIS) is to provide an indication of a collision. The Front Impact Sensor (FIS) sends acceleration data to the SRSCM.

Variant coding

After replacing the SRSCM with a new unit, the “Variant Codingâ€� procedure must be performed.    1. ...

Components

...

See also:

Seat Belt Switch Inspection
1. Remove the connector from the switch. 2. Check for continuity between terminals. Seat belt condition Continu ...

Intake Manifold Components
1. Intake manifold assembly 2. Intake manifold gasket 3. Electronic throttle body 4. Intake manifold stay ...

26 Brake Control Solenoid Valve(26/B_VFS) Specifications
Direct control VFS[26/B] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 9.81 ~ 500.14 (0.1 ~ 5.1, 1.42 ~ 72.54) Current value(mA) ...