Kia Forte: Fuel Pump Installation - Fuel Delivery System - Engine Control / Fuel System - Kia Forte TD 2014-2018 Service ManualKia Forte: Fuel Pump Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Pump Installation

1.
Install in the reverse order of removal.
  
Be careful of fuel pump direction when installing (Refer to the groove in the fuel tank).

Fuel pump plate cover installation bolt [LEV2]:
2.0 ~ 3.0 N.m (0.2 ~ 0.3 kgf.m, 1.4 ~ 2.2lb-ft)
Fuel Pump Plate Cover Installation [SULEV]:
78.5 ~ 98.1 N.m (8.0 ~ 10.0 kgf.m, 57.9 ~ 72.4lb-ft)

Fuel Pump Removal
[LEV2] 1. Release the residual pressure in fuel line (Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line ...

Fuel Filter Removal
1. Remove the fuel pump (Refer to “Fuel Pump” in this group). 2. Disconnect the electric pump wiring connector (A) and the fuel sender conn ...

See also:

Fuel Filler Cap Description
A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler cap and the filler ...

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least thirty seconds. ...

Rear Disc Brake
Components 1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Brake pad 6. Pad retainer ...

Copyright © www.kifomanual.com 2014-2024