Kia Forte: Trunk Lid Trim Replacement
| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Take care not to scratch the body surface.
|
|
|
1. |
After loosening the mounting screws, then remove the trunk inside
handle (A).
|
|
2. |
Detach the clips, then remove the trunk lid trim (A).
|
|
3. |
Install in the reverse order of removal.
|
• |
Replace any damaged clips.
|
|
|
(4Door, 2Door)
1. Trunk lid trim
...
(4Door)
1. Trunk lid latch assembly
(2Door)
1. Trunk lid latch assembly
...
See also:
Starter Removal
1.
Disconnect the battery negative terminal.
2.
Remove the air duct and air cleaner assembly.
(Refer to Engine Mechanical System - &quo ...
Compressor Installation
1.
Make sure the compressor mounting bolt with the correct length
is screwed in. Tighten the mounting bolts (A) with the specified tightening
order.
...
Inspection
1.
Inspect the check valve in the vacuum hose.
Do not remove the check va ...
Trunk Lid Trim Component Location
Trunk Lid Latch Component Location