Kia Forte: Air Ventilation Seat Unit Description - Seat Electrical - Body Electrical System - Kia Forte TD 2014-2019 Service ManualKia Forte: Air Ventilation Seat Unit Description

Second generation YD (2014-2019) / Kia Forte TD 2014-2019 Service Manual / Body Electrical System / Seat Electrical / Air Ventilation Seat Unit Description

The ventilated seat system uses a Push method to cool the seat. A blower mounted in the seat generates the cool air, which then travels through ducts to the seat back and cushion.

  
1.
Make sure not to spoil drink or water on the seat when equipping with ventilation system seat
2.
Because of inhaling the slight air, it is difficult to feel the air strength by the sense of touch.
Air Ventilation Seat Unit Circuit Diagram
...

Air Ventilation Seat Unit Removal
Cushion Blower 1. Remove the front seat assembly. (Refer to Body - "Front Seat Assembly") 2. Remove the cushion blower (A) ...

See also:

Description
The ECM (Electro Chromatic inside rear view Mirror) is for dimming the reflecting light from a vehicle behind at night, Preventing glare from the light. The forward facing sensor detects brig ...

Installation
1. Install the boot (A). 2. Install the clip to the clutch release fork. 3. Apply to grease in location ...

Audio Remote Control Inspection
1. Check for resistance between terminals in each switch position. [Audio (LH)] Switch Connector terminal Resista ...

Copyright © www.kifomanual.com 2014-2019