Kia Forte: Crash Pad Side Cover Replacement - Crash Pad - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Crash Pad Side Cover Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Crash Pad / Crash Pad Side Cover Replacement

  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Using a screwdriver or remover, remove the crash pad side cover (A).
[LH]

[RH]

2.
Install in the reverse order of removal.
  
Replace any damaged clips.
Crash Pad Side Cover Component Location
[LH] 1. Crash pad side cover [LH] [RH] 1. Crash pad side cover [RH] ...

Main Crash Pad Assembly Component Location
1. Main crash pad assembly ...

See also:

ETC (Electronic Throttle Control) System Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the resonator and the air intake hose (Refer to “I ...

Alternator Components
1. OAD (Overrunning Alternator Decoupler) pulley 2. Front housing 3. Front bearing 4. Stator 5. Rotor 6. Rear bearing 7. Rear housing 8. Rectifier assembly 9. Re ...

Tail Gate Assembly Component Location
(5Door) 1. Tail gate assembly ...

Copyright © www.kifomanual.com 2014-2024