Kia Forte: Removal - Front Disc Brake - Brake System - Brake System - Kia Forte TD 2014-2018 Service ManualKia Forte: Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Brake System / Brake System / Front Disc Brake / Removal

1.
Remove the front wheel & tire.

Tightening torque:
88.3 ~107.9 N.m (9.0 ~11.0 kgf.m, 65.1 ~79.6 lb-ft)

2.
Loosen the hose eyebolt (C) and caliper mounting bolts (B), then remove the front caliper assembly (A).

Tightening torque:
Brake hose to caliper (C):
24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 18.1 ~ 21.7 lb-ft)
Caliper assembly to knuckle (B):
78.5 ~ 98.1 N.m (8.0 ~ 10.0 kgf.m, 57.9 ~ 72.3 lb-ft)

3.
Remove the front brake disc by loosening the screws (A).

Front Disc Brake
Components 1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Inner pad shim 6. Brake pad 7. Pad retainer ...

Replacement
Front brake pads 1. Loosen the guide rod bolt (B) and pivot the caliper (A) up out of the way. Tightening torque: 21.6 ~ 31.4 N.m ...

See also:

Multimedia Jack Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the floor console assembly. (Refer to Body - "Floor Console Assembly&quo ...

Output Speed Sensor Signal Waveform
Fig 1) Input/Output speed sensor at low speed Fig 2) Input/Output speed sensor at high speed ...

SRSCM Connector Terminal
Pin Function (Connector A) Pin Function (Connector B) 1 Ignition 1 Passenger side impact sensor (+) 2 - ...

Copyright www.kifomanual.com 2014-2026