Kia Forte: Front Disc Brake

Adjustment

Stop lamp switch clearance adjustment If the gap between stop lamp switch and bracket is not 1.0 ~ 2.0mm(0.04~ 0.08in), conform to below. 1. Disconnect the s ...

Removal

1. Remove the front wheel & tire. Tightening torque: 88.3 ~107.9 N.m (9.0 ~11.0 kgf.m, 65.1 ~79.6 lb-ft) ...

See also:

Rearview camera
The rear view camera will activate with the ignition switch on and the shift lever in the R (Reverse) position. Note- during initial start up, system may not display instantly due to the audio ...

Brake Booster Vacuum Pressure Sensor Inspection
1. Check installation status of BBVPS and Vacuum hose or damage of vacuum hose. 2. Connect GDS to DLC (Data Link Cable). ...

Description
Idle Stop & Go (ISG) function automatically switches off the engine when the car is at a standstill if the and starts it again as soon as the brake pedal is released. This not only reduce ...