Kia Forte: Front Wheel Speed Sensor Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Brake System / ESC(Electronic Stability Control) System / Front Wheel Speed Sensor Removal

1.

Remove the front wheel and tire.

Tightening torque:

88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

2.

Remove the front wheel speed sensor mounting bolt (A).

Tightening torque:

6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

3.	Remove the front wheel guard .

4.	Disconnect the front wheel speed sensor connector (A), and then remove the front wheel speed sensor.

5.	Install in the reverse order of removal.

Front Wheel Speed Sensor Components

1. Front wheel speed sensor 2. Front wheel speed sensor connector ...

Rear Wheel Speed Sensor Components

1. Rear wheel speed sensor 2. Rear wheel speed sensor connector ...

See also:

Troubleshooting
1. The lamp switch inputs can be checked using the GDS. 2. To check the input value of lamp switch, select option "Body Control Module ...

Troubleshooting
Problem Possible cause Solution Not pairing Bluetooth device of Car is not discoverable mode Enter Bluetooth pairing (searching) mode User’ ...

35R Clutch Control Solenoid Valve(35R/C_VFS) Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

Categories

Copyright © www.kifomanual.com 2014-2024