Kia Forte: Front Body - Body Dimensions - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Front Body

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Body Dimensions / Front Body

Front Body A

* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ]

Front Body B

* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ]

Front Body C

* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ]

Front Body D

* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ]

Hood hinge mounting hole (Ø10)

Fender apron upper member corner

Front shock absorber mounting hole
(Ø13)

Side outer panel front corner

Side outer panel front corner

Engine mounting bracket hole (Ø11)

Transaxle mounting hole (Ø12)

Engine mounting bracket hole (Ø15)

Transaxle mounting hole (Ø13)

Front side member tooling hole (Ø6.6)

Front side member tooling hole (Ø6.6)

Front end module mounting hole
(Ø11.5)

2Door
...

Side Body
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Front side m ...

See also:

Positive Crankcase Ventilation (PCV) Valve Installation
1. Installation is reverse of removal. PCV Valve installation: 1.96 ~ 2.94 N.m (0.2 ~ 0.3 kgf.m, 1.45 ~ 2.17 lb-ft) ...

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Removal
   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

Seat Heater (Air Ventilation) Inspection
Front Seat Heater (Driver) 1. Check for continuity and measure the resistance between terminals. No. Description No. ...

Copyright www.kifomanual.com 2014-2026