(2Door) |
|
|
1. |
Remove the cap (B) and bolt, then remove the garment hook (A).
|
2. |
Install in the reverse order of removal.
|
Engine Control Module (ECM) Removal
When replacing the ECM, the vehicle equipped with the immobilizer
must be performed procedure as below.
...
Variable Charge Motion Actuator (VCMA) Description
The Variable Charge Motion Actuator (VCMA) is installed on the inlet of
the intake manifold.
It consists of a DC motor which actuates the VCM valve and a position
sensor which detects th ...
Floor Console Assembly Replacement
[Floor Console Assembly]
[M/T]
•
Put on gloves to protect your hands.
...