1. |
Loosen the windshield wiper arm nut (B) after removing a wiper
cap (A).
|
2. |
Remove the windshield wiper arm and blade.
|
3. |
If necessary, release the wiper blade fixing clip by pulling up
and remove the wiper blade from the inside radius of wiper arm.
|
4. |
Disconnect the washer hose (A) connected to cowl top cover.
|
5. |
Remove the weather strip and the cowl top cover (A) after removing
4 retainers.
|
6. |
Disconnect the wiper motor connector from the wiper motor & linkage
assembly.
|
7. |
Remove the windshield wiper motor and linkage assembly (A) after
removing 2 bolts.
|
8. |
Disconnect the connector (A) from the wiper motor.
|
9. |
Hold the wiper motor crank arm and remove the upper linkage (A)
from the wiper motor crank arm.
|
10. |
Remove the lower linkage (A) from the wiper motor crank arm.
|
11. |
Remove the crank arm (A) after loosening the mounting nut.
|
12. |
Remove the wiper motor (A) with 3 bolts.
|
Intake Actuator Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to Body -"Glove Box Housing")
...
Oil Pressure Switch Inspection
1.
Check the continuity between the terminal and the body with an
ohmmeter.
If there is no continuity, replace the oil pressure switch.
...
Audio Remote Control Inspection
1.
Check for resistance between terminals in each switch position.
[Audio (LH)]
Switch
Connector
terminal
Resista ...