Kia Forte: Brake fluid

Engine coolant

The high-pressure cooling system has a reservoir filled with year-round antifreeze coolant. The reservoir is filled at the factory. Check the antifreeze protection and coolant level at least once a ...

Checking the brake/clutch  fluid level

Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reservoir cap and adding brake/clutch* ...

See also:

Cylinder Block Inspection
1. Remove gasket material. Using a gasket scraper, remove all the gasket material from the top surface of the cylinder block. 2. Cl ...

Installation
1. Install in the reverse order of removal. 2. After installation, bleed the brake system. (Refer to Brake system bleeding) ...

DC/DC Converter Circuit Diagram
   In the ISG mode, if the power of an audio system turnsOFF by drawdown while “Auto Startingâ€� or “Idle Startingâ ...