No. |
Procedure |
1 |
Locate vehicle to flat plane |
2 |
Tire check |
3 |
IGN1 ON |
4 |
Head lamp Low Beam ON |
5 |
Connection with diagnostic tool |
6 |
Initial command by diagnostic tool |
7 |
Clear DTC Code |
8 |
IGN1 OFF → ON |
9 |
Re- Connection with diagnostic tool |
10 |
Checking of HLLD output value as 15% and DTC
Code |
11 |
HLLD actuating by diagnostic tool command |
12 |
Head lamp mechanical Initial Aiming |
|
1. |
Select the vehicle model and "Head lamp leveling".
|
2. |
GDS can operates actuator forcefully, input/output value monitoring
and self diagnosis.
|
3. |
To perform functional test on AHLS outputs, select "Actuation
Test".
|
4. |
Select " Parameter setting & Zero position Initial".
|
5. |
Confirm that AHLS operate forcefully in "Head lamp leveling" menu.
|
6. |
To check the DTC of the head lamp leveling system, select "Diagnostic
trouble codes"
|
Components
1. Reverse hose
2. Master cylinder
3. Ignition lock switch
4. Clutch switch
5. Clutch arm assembly
6. Pedal pad
...
Brake Booster Operating Test
For simple checking of the brake booster operation, carry out the following
tests.
1.
Run the engine for one or two minutes, and then stop it. If the
pedal depresses ...
In-car Sensor (DATC only) Inspection
1.
Turn the ignition switch ON.
2.
Blow air with changing temperature into the in-car sensor air
inlet. Measure the sensor resistance betwe ...