Kia Forte: Auto Head Lamp Leveling Unit Description

According to driving environment and loading state of vehicle, head lamp lighting direction is changed to keep the driver's visibility range and to protect the driver's vision from glare, aiming at safety driving.

Sensor integrated ECU mounting on the rear center arm drives the actuator mounting on the head lamp since sensing the input signal following the vehicle's statically changes.

Head lamp beam is automatically operated by chassis tilt.

Auto Head Lamp Leveling Unit Circuit Diagram

...

Auto Head Lamp Leveling Unit Operation

Operating Procedure 1. Suspension angle change resulted from vehicle's load change. 2. Sensor angle change. 3. ...

See also:

Brake Switch Inspection
1. Connect a circuit tester to the connector of stop lamp switch, and check whether or not there is continuity when the plunger of the stop lamp switch is pushed in an ...

Photo Sensor Replacement
1. Disconnect the negative (-) battery terminal. 2. With a flat-head screwdriver, remove the photo sensor (A) from the center of the defros ...

Power Window Motor Inspection
Front Power Window Motor Inspection 1. Remove the front door trim. (Refer to Body - "Front Door Trim") 2. Disconnect the c ...