Kia Forte: Cylinder Block Installation
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Cylinder Block / Cylinder Block Installation
| 1. |
Assemble the other parts in the reverse order of disassembly.
|
In case the cylinder block is replaced with a new one, select
the proper crankshaft main bearing and the piston according to the crankshaft
journal bore mark and the cylinder bore mark on the cylinder block.
|
Cylinder Block Inspection
1.
Remove gasket material.
Using a gasket scraper, remove all the gasket material from the
top surface of the cylinder block.
2.
Cl ...
Cooling System
...
See also:
Center Pillar Trim Component Location
(4Door, 5Door)
1. Center pillar lower trim
2. Center pillar upper trim
(2Door)
1. Rear inner outer trim
2. Center pillar upper ...
Power Outside Mirror Switch Inspection
1.
Disconnect the power door mirror switch module connector from
front door trip panel.
2.
Check for the continuity between termina ...
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the smart junction box
(Refer to Body Electri ...
Categories
- Home
- Kia Forte BD 2019-2026 Owners Manual
- Kia Forte BD 2019-2026 Service Manual
- First Generation
- Second generation
- Kia Forte TD 2014-2018 Owners Manual
- Kia Forte TD 2014-2018 Service Manual
Copyright www.kifomanual.com 2014-2026