Kia Forte: Variable Charge Motion Actuator (VCMA) Components
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Variable Charge Motion Actuator (VCMA) Components
| 1. Coupling 2. Shaft 3. Stabilizer O-ring 4. Stabilizer 5. O-ring |
6. Insert nut 7. Stabilizer Cover 8. Valve 9. Hole cover |
Variable Charge Motion Actuator (VCMA) Description
The Variable Charge Motion Actuator (VCMA) is installed on the inlet of
the intake manifold.
It consists of a DC motor which actuates the VCM valve and a position
sensor which detects th ...
Variable Charge Motion Actuator (VCMA) Specification
Motor
Item
Specification
Coil Resistance (Ω)
3.4 ~ 4.4 [20°C(68°F)]
Position sensor
Item
Specification
Coil Res ...
See also:
Starter Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery ...
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...
Troubleshooting
Symption
Suspect area
Remedy
Engine misfire with abnormal internal lower engine noises
•
Worn crankshaft bearings
...
Categories
- Home
- Kia Forte BD 2019-2026 Owners Manual
- Kia Forte BD 2019-2026 Service Manual
- First Generation
- Second generation
- Kia Forte TD 2014-2018 Owners Manual
- Kia Forte TD 2014-2018 Service Manual
Copyright www.kifomanual.com 2014-2026