Kia Forte: Description

Idle Stop & Go (ISG) function automatically switches off the engine when the car is at a standstill if the and starts it again as soon as the brake pedal is released. This not only reduces fuel consumption, it also lowers emissions. Idle Stop & Go (ISG) function also has a built-in sensitivity to driving safety and comfort.

The engine is not switched off if certain conditions relating to safety and comfort have not been fulfilled (For example, when the engine oil is still cold, when the battery is running low or when the outside temperature is below 3°C). It can be deactivated by pressing the ISG OFF switch on the crash pad lower panel.

Sample scenario: switching off the engine at a standstill at a red traffic light or in stop-and-go traffic.

ISG (Idle Stop & Go) System

...

Operation

1. Vehicle moving. 2. The transmission lever position is D-range. The brake pedal is released. 3. The ...

See also:

Specification
Item Specification Ultrasonic sensor Voltage rating DC 12 V Detecting range 30 cm ~ 120 cm Operation voltage DC 9 ~ 16 ...

SS-A Solenoid Valve(ON/OFF) Removal
1. Disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - &qu ...

Lubricants
Items  Specified lubricants  Quantity Clutch release cylinder assembly Brake fluid DOT 3 or DOT 4  As required Input shaft s ...