Kia Forte: Brake Switch Description

The present brake switch is used as an input variable for the ISG function to detect bracke operation.

Oil Pump Unit (OPU) Inspection

OPU Problem Inspection Procedure 1. TEST OPU GROUND CIRCUIT: Measure resistance between OPU and chassis ground using the backside of OPU harness connector ...

Brake Switch Inspection

1. Connect a circuit tester to the connector of stop lamp switch, and check whether or not there is continuity when the plunger of the stop lamp switch is pushed in an ...

See also:

Room lamp
To turn the room lamp ON or OFF, push the switch. If your vehicle is not equipped with a map lamp, the room lamp will also turn on or off as follows. The room lamp comes on when a door is opene ...

Manual transaxle operation
The manual transaxle has 6 forward gears. This shift pattern is imprinted on the shift knob. The transaxle is fully synchronized in all forward gears so shifting to either a higher or a lower ge ...

Cooling Fan Disassembly
1. Remove the cooling fan (A) from the cooling fan assembly. 2. Disconnect the fan motor connector (A) from the resistor. ...