Kia Forte: Valve Body Components Location
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Hydraulic System / Valve Body Components Location
| 1. Pressure Controle Valve(PCV) adjust screw 2. Solenoid valve 3. Oil temperature sensor |
4. Accumulator 5. Low & Reverse Brake(LR/B) pressure flow hole 6. Underdrive Brake(UD/B) pressure flow hole |
Valve Body Flow
| 1. To cooler 2. From cooler 3. Lubrication(rear) 4. Overdrive pressure 5. Reducing pressure (red2) 6. Reducing pressure (red1) 7. Damper release pressure 8. Damper apply pressure |
9. Lubrication(front) 10. 35R Clutch (35R/C) pressure 11. 26 Brake (26/B) pressure 12. From oil pump 13. To oil pump 14. Underdrive pressure 15. Low & reverse pressure |
Valve Body Description
The valve body is essential to automatic transaxle control and consists
of various valves used to control the oil feed from the oil pump. Specifically,
these valves consist of pressure regula ...
Valve Body Removal
1.
Disconnect the negative (-) battery cable.
2.
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - &qu ...
See also:
SS-B Solenoid Valve(ON/OFF) Removal
1.
Disconnect the negative (-) battery cable.
2.
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - &qu ...
SS-A Solenoid Valve(ON/OFF) Installation
1.
Install in the reverse order of removal.
•
...
Front Alignment Adjustment
When using a commercially available computerized wheel alignment
equipment to inspect the front wheel alignment, always ...
Copyright © www.kifomanual.com 2014-2025