Kia Forte: Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Restraint / SRSCM / Seat Belt Buckle Sensor (BS) / Removal

1.	Disconnect the battery negative cable, and wait for at least three minutes before beginning work.

2.	Remove the front seat assembly. (Refer to Body - "Front seat")

3.	Loosen the seat belt buckle mounting bolt and remove the seat belt buckle sensor (A).

Components

...

Installation

Be sure to install the harness wires so they will not pinch or interfere with other parts. ...

See also:

Certification label
The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross V ...

Cooling Fan Specifications
Item Specification Fan type PULLER Fan speed control Resistor (HI-LOW-OFF) Air flow rate [㎥/h (yd³/h)] 1,700 (2,22 ...

Lubricants
Items Specified lubricants Quantity Clutch release cylinder assembly Brake fluid DOT 3 or DOT 4 As required Input shaft s ...

Categories

Copyright © www.kifomanual.com 2014-2026