Kia Forte: Manifold Absolute Pressure Sensor (MAPS) Inspection - Engine Control System - Engine Control / Fuel System - Kia Forte TD 2014-2018 Service ManualKia Forte: Manifold Absolute Pressure Sensor (MAPS) Inspection

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Manifold Absolute Pressure Sensor (MAPS) Inspection

1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
Condition
Output Voltage (V)
IG ON
3.9 ~ 4.1
Idle
0.8 ~ 1.6

Manifold Absolute Pressure Sensor (MAPS) Circuit Diagram
(M/T) (A/T) ...

Manifold Absolute Pressure Sensor (MAPS) Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the manifold absolute pressure sensor connecto ...

See also:

TCM Terminal Input/ Output Signal
Connector [A] Pin Description Condition Input/output value Type Level 1 -       ...

Thermostat Troubleshooting
Symptoms Possible Causes Remedy Coolant leakage • From the thermostat gasket Check the mounting ...

Front Oil Seal Components
1. Front oil seal ...

Copyright www.kifomanual.com 2014-2026