Kia Forte: Fuses And Relays

Air Ventilation Seat Unit Installation

Cushion Blower 1. Install the cushion blower under the bottom of the seat. 2. Install the front seat aseembly. Back Blower ...

Component Location

1. EMS box assembly (Engine control relay, Fuel pump relay, Air conditioner compressor relay) 2. C/Fan 1 relay 3. C/Fan 2 relay 4. SSB 4(IG2) relay 5. Blower relay ...

See also:

Battery Sensor Installation
1. Install in the reverse order of removal. Battery sensor cable installation bolt: 10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~10.1 lb-ft) ...

Crankshaft Damper Pulley Removal and Installation
1. Remove the RH front wheel. 2. Remove the drive belt. (Refer to Timing System - "Drive Belt") 3. ...

Installation
1. Install the BCM unit. 2. Install the center lower cover. 3. Install the floor console assembly. ...