Kia Forte: Ignition Lock Switch

Installation

1. Install in the reverse order of removal. 2. Adjust the clutch switch. (1) Adjust the gab by rotating t ...

Description

• Component location : Ignition lock switch is connected to clutch pedal assembly. • Function 1. Start i ...

See also:

Components Operations
ECM (Engine Control Module) 1. The ECM(PCM) (A) carries out a check of the ignition key using a special encryption algorithm, which is programmed into the transponder ...

Rear Door Belt Inside Weatherstrip Replacement
(4Door, 5Door) 1. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 2. Remove the rear door bel ...

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Removal
   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...