Kia Forte: Input Speed Sensor Specifications
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Input Speed Sensor Specifications
▷ Type: Hall effect sensor
| Operation condition [°C(°F)] |
((-)40 ~ 150)) -40 ~ 302 |
|
| Air gap(mm)in. |
(1.2 ~ 1.8) 0.0472 ~ 0.0709 |
|
| Output voltage(V) |
High |
1.18 ~ 1.68 |
| Low |
0.59 ~ 0.84 |
|
Input Speed Sensor Description
Input speed sensor is a vital unit that measures the rate of rotation
of the input shaft inside the transaxle and delivers the readings to the Transaxle
Control Module(TCM). The sensor provid ...
See also:
Transaxle Oil Temperature Sensor Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the Solenoid valve connector.
3.
Measure resistance between sensor ...
Replacement
1.
Remove the cap (A) and remove the nuts, then remove the wiper
arm (B).
Tightening torque :
22.6~26.5 N.m(2.3~2.7 kgf.m, 16.6~19.5 ...
Crash Pad Upper Panel Replacement
•
Put on gloves to protect your hands.
&n ...
Copyright © www.kifomanual.com 2014-2024