1. |
Remove the overhead console lamp assembly then check for continuity
between terminals. If the continuity is not as specified, replace the
map lamp switch.
|
Tightening Torques
Engine Control System
Item
kgf.m
N.m
lb-ft
ECM installation bolt
0.8 ~ 1.2
7.8 ~ 11.8
5.8 ~ 8.7
ECM bracket ins ...
Control Cable Adjustment
Select cable adjustment
1.
Remove the select cable snap pin (A) and then remove the select
cable (B) from the shift lever pin.
2.
...
Crash Pad Side Cover Component Location
[LH]
1. Crash pad side cover [LH]
[RH]
1. Crash pad side cover [RH]
...