Kia Forte: Power Outside Mirror Switch Removal - Power Door Mirrors - Body Electrical System - Kia Forte TD 2014-2019 Service ManualKia Forte: Power Outside Mirror Switch Removal

Second generation YD (2014-2019) / Kia Forte TD 2014-2019 Service Manual / Body Electrical System / Power Door Mirrors / Power Outside Mirror Switch Removal

1.
Disconnect the negative(-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
3.
Disconnect the power window switch connectors (A).

4.
Remove the power window switch (A) after loosening 4 screws.

5.
Remove the power door mirror switch (A) after loosening a screw.

  
Be careful not to damage the hook when removing the switch module.
Power Outside Mirror Switch Inspection
1. Disconnect the power door mirror switch module connector from front door trip panel. 2. Check for the continuity between termina ...

Power Outside Mirror Switch Installation
1. Install the driver power window switch and connectors. 2. Install the front door trim. ...

See also:

Output Speed Sensor Inspection
1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

Components
1. Windshield glass 2. Windshield glass moulding ...

Front Impact Sensor (FIS)
The front impact sensor (FIS) is installed in the front side member. They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the F ...

Copyright © www.kifomanual.com 2014-2019