Kia Forte: Starter Specification
Second generation YD (2014-2019) / Kia Forte TD 2014-2019 Service Manual / Engine Electrical System / Starting System / Starter Specification
Starter [Non-ISG type]
| Item |
Specification |
|
| Rated voltage |
12 V, 1.2 kW |
|
| The number of pinion teeth |
13 |
|
| Performance [No-load, 11 V] |
Ampere |
Max. 70 A |
| Speed |
Min. 2,400 rpm |
|
Starter [ISG type]
| Item |
Specification |
|
| Rated voltage |
12 V, 1.4 kW |
|
| The number of pinion teeth |
15 |
|
| Performance [No-load, 11.5 V] |
Ampere |
Max. 100 A |
| Speed |
Min. 1,915 rpm |
|
Starter Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery ...
Starter Components
[NON-ISG Type]
1. Front bracket assembly
2. Magnet switch assembly
3. Lever
4. Reducer assembly
5. Lever stop
6. Gasket sheet
7. Yoke assembly
8. Armat ...
See also:
Knock Sensor (KS) Installation
•
Install the component with the specified torques.
•
...
Side Body
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Front side m ...
Auto Defogging Sensor Description
The auto defogging sensor is installed on the front windshield glass.
The auto defogging sensorr senses moisture on the windshild. The air conditioner
control module receives the signal from ...
Copyright © www.kifomanual.com 2014-2019