Kia Forte: Tail Gate Lift Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Tail Gate / Tail Gate Lift Replacement

(5Door)

•	Take care to not let the tailgate fall on you as the lifts are removed. Have a helper hold the tailgate open, or use a secure method to hold it open.

1.	Loosen the tail gate lifter mounting bolts.

2.

Using a screwdriver, lift the socket clips (A) up slightly on both ends of the tail gate lifter (B).

Tightening torque :

6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

3.

Push the socket of the lifter into the bracket for installation.

•	Make sure the tail gate locks and opens properly and locks securely.

Tail Gate Latch Replacement

(5Door) • When prying with a flat-tip screwdriver, wrap it with protective ...

Tail Gate Weatherstrip Replacement

(5Door) 1. Remove the tail gate weatherstrip (A). ...

See also:

Variable Charge Motion Actuator (VCMA) Description
The Variable Charge Motion Actuator (VCMA) is installed on the inlet of the intake manifold. It consists of a DC motor which actuates the VCM valve and a position sensor which detects th ...

Sunroof open warning (if equipped)
If the driver removes the ignition key (smart key: turns off the engine) and opens the driver-side door when the sunroof is not fully closed, the warning chime will sound for a few seconds and a ...

35R Clutch Control Solenoid Valve(35R/C_VFS) Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

Categories

Copyright © www.kifomanual.com 2014-2024