Kia Forte: CVVT & Camshaft Components

Cylinder Head Cover Installation

1. Install cylinder head cover. (1) The hardening sealant located on the cylinder head cover and the gap between the timing chain co ...

CVVT & Camshaft Description

Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine ...

See also:

On-board Refueling Vapor Recovery (ORVR) valve Removal
1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Remove the fuel pump. (Refer to Fuel System - "Fuel Pump&qu ...

Removal
1. Disconnect the brake fiuid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder rese ...

Installation
   Clutch cover and disc should be replaced as a set. 1. Apply grease on a disc spline ...