Kia Forte: Cylinder Head Assembly

Timing Chain Installation

1. Check that the TDC marks on the intake and exhaust CVVT sprockets are slightly turned (about 2 to 3 teeth) from the TDC position after the timing chain has been rem ...

Components

1. Camshaft bearing cap 2. Camshaft front bearing cap 3. Exhaust camshaft 4. Intake camshaft 5. Exhaust CVVT assembly 6. Intake CVVT assembly 7. Cam carrier 8. Cyli ...

See also:

Rear Disc Brake
Components 1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Brake pad 6. Pad retainer ...

Telemetics Unit (TMU) Installation
1. Install the MTS unit after connecting the cable and connector. 2. Install the glove box housing. 3. Connect ...

Adjustment
Stop lamp switch clearance adjustment If the gap between stop lamp switch and bracket is not 1.0 ~ 2.0mm(0.04~ 0.08in), conform to below. 1. Disconnect the s ...