Kia Forte: Front Disc Brake

Adjustment

Stop lamp switch clearance adjustment If the gap between stop lamp switch and bracket is not 1.0 ~ 2.0mm(0.04~ 0.08in), conform to below. 1. Disconnect the s ...

Removal

1. Remove the front wheel & tire. Tightening torque: 88.3 ~107.9 N.m (9.0 ~11.0 kgf.m, 65.1 ~79.6 lb-ft) ...

See also:

Fuel Sender Installation
1. Install in the reverse order of removal. ...

CVVT & Camshaft Components
1. Camshaft bearing cap 2. Camshaft front bearing cap 3. Exhaust camshaft 4. Intake camshaft 5. Exhaust CVVT assembly 6. Intake CVVT assembly ...

Blower Resistor Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the blower resistor connector (A) and then remove the blower resistor (B) af ...