Kia Forte: Front Hub / Knuckle Installation - Front Axle Assembly - Driveshaft and axle - Kia Forte TD 2014-2018 Service ManualKia Forte: Front Hub / Knuckle Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Driveshaft and axle / Front Axle Assembly / Front Hub / Knuckle Installation

1.
Install in the reverse order of removal.
  
Use a SST (09581-11000) when installing the brake caliper assembly.
(Refer to Brake System - "Front Disc Brake")
2.
Check the front alignment.
(Refer to Suspension System - "Front Alignment")
Front Hub / Knuckle Inspection
1. Check the hub for cracks and the splines for wear. 2. Check the brake disc for scoring and damage. 3. C ...

Driveshaft Assembly
...

See also:

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications
Direct control VFS[UD/B] ▷ Control type : Normal high type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current value(mA) ...

Windshield washers (front)
In the OFF position, pull the lever gently toward you to spray washer fluid on the windshield and to run the wipers 1-3 cycles. Use this function when the windshield is dirty. The spray and wip ...

Rear Spoiler Replacement
(5Door)    • When prying with a flat-tip screwdriver, wrap it with protective ...

Copyright © www.kifomanual.com 2014-2024